Nokia 112 Successfully Flash Via usb by Mx key Tested 10000000%

Successfully Flash Nokia 112 Via usb by Mx key Tested 10000000%


MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: C08702E3
Using device: USB ROM and HTI, FW ver: 00.50, SN: 01003341
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.50
EBL version: Quantum_Bootloader_10.50_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35368405096334
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_35368405096334_back.RPL)
Processing file: 8A6B81A9_rm837__03.28.mcusw
Downloading item CODE:rm837__03.28.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.360 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 3.125 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 33.328 s
Checksum verified (0xEE19)
Processing file: 9B5C463C_rm837__03.28.ppm_m4
Downloading item CUST:package_m4.ppm_ebl_psi.fls, num block: 1, size: 3.51 MB
Erasing area 0x41BC0000-0x41F42C8E ...OK
Programming completed in 5.344 s
Checksum verified (0xD935)
Processing file: 61ADCF79_rm837__03.32.image_m2_059P790
Downloading item CUST:package_m2_059P790.image.fls, num block: 1, size: 15.13 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 19.828 s
Checksum verified (0xB5E4)
Total time for flashing process(boot+erase+write) was 8 min 21.610 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: B67324
Verifying communication to device OK.



Phone type: RM-837 (Nokia 112)
SW version: V 03.28 13-07-12 RM-837 (c) Nokia
Imei plain: 35368405096334-1
Product code: 059P2D6
Battery voltage: 3800 mV, current: 145 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: M4
Language Pack:
- not available.

Master code: 5742623017
Camera config: NI00CS0000040C21AC67, ver: 004.032

Imei net: 35368405096334
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN